BC Biomedical IPA-2000S Bedienungsanleitung PDF herunterladen (Seite 61)

2-29

PURGING

PURGINGPURGING

PURGING

Attach CDA or N2 Line to Fluid In on Module

A Clean Dry Air (CDA) or N

line is used at 20 PSI to purge

the Module of water if no fluid tests are going to be run for a

period of more than 24 hours.

STEP 1

Allow CDA or N2 Line to Flow at 20 PSI for At

Least One Minute

Turn on the flow of CDA or N

for at least one minute.

STEP 2

NOTE:

C One minute is the absolute

minimum flow time for effective

purging. There is no maximum limit.

Move Line to Fluid Out on Module

Turn off the flow of CDA or N

and move the line to the outlet.

Turn on the flow.

STEP 3

Go into User Setup Mode

From Main Screen, Enter Setup Screen, Enter the Access

Code for User Setup for the system, View Setup Parameters.

(See USER SETUP for details.)

STEP 4

Set Air Purge Parameter to On

Go into Edit Mode, Use to turn the Air Purge On.

(See USER SETUP for details.)

STEP 5

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 161 162

Keine Kommentare

BC Biomedical IPA-2000S Bedienungsanleitung Seite 61